Intrim SK800B Shadowline®

Intrim SK800 Shadowline^® system skirting board and architraves is designed to be installed prior to wall plastering to provide a flush finish. This style of moulding is recommended for use in a Modern Contemporary / Art Deco style interior.

SK800B is 15mm thick suiting 13mm plasterboard, has a Shadowline groove that is 10mm high x 6mm deep, and available in 65mm, 90mm, 110mm, 160mm, 205mm and 260mm visible heights. Samples are available for this profile.

Unlike traditional skirting boards, the height dimensions on Shadowline are now shown as the visible height to the top of the Shadowline Groove (A). This allows you to measure up from the floor to select your profile sizes. The actual material is much higher than the visible size, as the top section of the skirting board sits behind the plasterboard. Refer to the diagram and Shadowline table of dimensions  to help you select the size that best suits your requirements.

Intrim SK800B Shadowline® is specially crafted in a range of timbers including FJ Pine Primed and MR MDF Primed. Intrim’s timber mouldings are available pre primed, helping you save even more time on your project. Please note 205mm and 260mm heights are available in MDF only. 

Intrim’s Shadowline system is also available in 18mm Fire Resistant MDF where compliance with AS1530.4-2014 fire standards are required. Find out more here.

Available in:

• 65mm wide x 15mm thick
• 90mm wide x 15mm thick
• 110mm wide x 15mm thick
• 160mm wide x 15mm thick
• 205mm wide x 15mm thick
• 260mm wide x 15mm thick

• FJ Pine Primed
• MR MDF Primed