Intrim® IN27

Intrim use local distributors for selected regional areas around Australia. If a distributor is servicing a specific region (by postcode), any direct enquiries to Intrim are automatically redirected to the local distributor.

Most timber mouldings are produced in either FJ Pine or MDF and is supplied in lengths of 5.4M . All solid clear timber mouldings such as Victorian Ash come in random lengths. Sheet products such as VJ Board Pro are available in set lengths up to 3.6M lengths allowing you to order the length that best suits your project.

Wainscoting wall panelling is a decorative wall treatment that comes in a variety of styles. Wainscoting is created using timber mouldings such as inlay mould, chair rail, decorative large skirting boards and sometimes even lining boards, VJ wall panelling and other materials depending on the style of Wainscoting you are looking to create. You can learn about all the different styles and materials required to get the look on our Wainscoting page.

No, however if your chair rail is thicker than your architrave any overhang of the chair rail would need to be champered at a 45 degree angle to finish it.

Once you have chosen the skirting board the next decision to make is about the architraves. While most people will choose the same profile – in a smaller height – it is possible to mix and match profiles to achieve a look that is both interesting and beautiful. Following are some recommendations that will help in getting the mix right: 1) Architrave widths for different door heights recommendations:

Door Height	Architrave Width
2.04m	66-90mm
2.34m	90-135mm
2.70m	115mm+

2) Skirting and architrave combination recommendations:

Skirtings	Architrave
90-135mm	66-90mm
115-185mm	90-115mm
185-230mm	90-115mm
230mm+	115mm+

The most commonly used combinations are:

• 135mm skirting with 90mm architrave
• 185mm skirting with 90mm architrave

Our timber mouldings are priced per metre and sold in long lengths. The larger the order on our classic range the lower the price per metre as the machine setup and handling cost are spread over the larger volume. Click the price tab on any individual product page to access the price list.  If you are looking for bespoke custom mouldings, or require less than our minimum 10 lengths, additional costs apply. Please call our sales team on 1800 622 081.  

The minimum order quantity is 10 lengths. Furthermore, we always recommend increasing your order slightly to allow for any wastage or damage. It is the most cost-effective option instead of placing a top-up order if you underestimate your requirements. 

What material is good for external mouldings?  We recommend using polyurethane for external mouldings that are exposed to sunlight and the elements, including window and door surrounds. Polyurethane does not chip or split like timber and will look good for years with minimal maintenance. Primed FJ pine may be used for mouldings under eaves and ceilings that are not exposed to the elements and direct sunlight. Both are able to be painted with external grade paints following the instructions from the paint manufacturer. 

For wet areas glossy finish is recommended because, unlike Matt which absorbs moisture, glossy paint deflects moisture due to the harder finish. Depending on your choice or requirement of gloss level you can choose from Dulux super enamel semi-gloss or Dulux super enamel high gloss. For the undercoat, we recommend Dulux professional primer sealer undercoat.