Intrim SK805 Shadowline®

Intrim SK805 Shadowline^® system skirting board and architraves is designed to be installed prior to wall plastering to provide a flush finish. This style of moulding is recommended for use in a Modern Contemporary / Art Deco style interior.

SK805 is 12mm thick suiting 10mm plasterboard, has a Shadowline groove that is 5mm high x 5mm deep, and available in 65mm, 90mm, 110mm, 160mm, 205mm and 260mm visible heights. Samples are available for this profile.

Unlike traditional skirting boards, the height dimensions on Shadowline are now shown as the visible height to the top of the Shadowline Groove (A). This allows you to measure up from the floor to select your profile sizes. The actual material is much higher than the visible size, as the top section of the skirting board sits behind the plasterboard. Refer to the diagram and Shadowline table of dimensions  to help you select the size that best suits your requirements.

Intrim SK805 Shadowline® is specially crafted in a range of timbers including FJ Pine Primed and MR MDF Primed. Intrim’s timber mouldings are available pre primed, helping you save even more time on your project. Please note 205mm and 260mm heights are available in MDF only. 

Australian Patent No AU2018101091, 2018.

Available in:

• 66mm wide x 12mm thick
• 90mm wide x 12mm thick
• 115mm wide x 12mm thick
• 135mm wide x 12mm thick
• 185mm wide x 12mm thick
• 230mm wide x 12mm thick
• 285mm wide x 12mm thick

• FJ Pine Primed
• MR MDF Primed