Back to products

Intrim® Intense Hold Adhesive

You can purchase this item online.

ADH2

$25.00
 
Minimum quantity of 1 sheets
$25.00
SAVE {percentage}% when you buy in bulk. Order more than {40} cartridges to get {cost} per cartridge.
The Intrim sales team will be in touch after placing your order to organise shipping and payment

Intrim’s Intense Hold is the solution for internal and external applications where a waterproof and weatherproof solution is required.

Use as an adhesive with:

  • Intrim VJ Board Pro to timber and steel frames, and existing wall lining.
  • Aluminium U channel and flexible LED strip in underside of LED Timber Handrail
  • Polyurethane mouldings for external and internal applications
  • Any MDF or timber sheet to existing wall lining including plasterboard, timber, polyurethane, glass, concrete.

Strength

With a super strong hold to bond all materials and surfaces, you can’t go wrong with Intense Hold!

Why Use it?

Intrim’s Intense Hold is the adhesive solution for bonding Intrim VJ Board Pro to timber and steel frames, and existing wall linings, Polyurethane mouldings for internal and external applications, and bonding Aluminum U Channel and flexible LED strips to the underside of our LED timber handrail.

Features

It can be used for all bonding and sealing application, can be painted over, is mould resistant, waterproof, is odourless, free of isocyanates and solvents, and does not attack substrates.

Where can I use it?

Can be used on all materials and all substrates (except PE, PP, bitumen and Teflon) to get an Intense Hold.

Tube Size

Available in a 290ml tube.

Application Instructions

Please read application instructions for the best adhesive results.

Safety Data Sheet

Download a copy HERE.

Get a hold with Intense Hold!

  1. Select your desired measurements and materials.
  2. Select your quantity and place your order.
  3. A friendly member of the Intrim sales team will contact you to confirm your order, and arrange shipping and payment.

Frequently Asked Questions

What glue do we recommend for installations on ceiling?

For ceiling applications use the Intrim Ultra intensive.

Do you glue architraves?

Architraves are glued to hold the 45 degree join together. Intrim Intense Grip Adhesive can be used to apply an 66mm wide x 18mm thick architrave without nails, however larger architraves are recommended to be nailed due to the weight. If window coverings are going to be installed directly onto the architrave, the glue only method will likely not be strong enough therefore will need to be nailed aswell to support the weight of the moulding and the window covering.

Do you glue or nail wainscoting?

To create wainscoting you use both. Glue is applied on the back of the inlay mould lengths and glued to the wall where you will need to apply pressure for 10 seconds to the piece. If you need to move a piece of inlay mould after this you can but need to reapply 10 seconds of pressure. You then nail inlay mould pieces using short nails and fix nails on a slight angle to gain more holding power to the plaster while the glue dries. Intrim also has its own glue Intrim Intense Grip Adhesive available for purchase.  

How many tubes of adhesive do I need for my order?

The quantity of adhesive tubes you need depends on which Intrim adhesive you are buying and the quantity of your order. Outlined below is the estimated quantity of timber mouldings that require 1 tube of adhesive. If the quantity of timber you need is more, the quantity of adhesive tubes you have to order will increase accordingly.   
Intrim® Intense Grip Adhesive (1 tube of 350gm) 5L Mouldings (1L=5.4metre) Read more
Intrim® Intense Power Adhesive (1 tube of 290gm) 1L Moulding (1L=5.4metre) Read more
Intrim® Intense Hold Adhesive (1 tube of 290gm) 4 sheets of 2.4 x1.2m VJ Board, or 20 lineal metres of LED strip, or 4Lx5.1m polyurethane mouldings. Read more 

How to dispense and apply our adhesive easily?

When using our adhesive in cartridges such as the Intense Grip, Intense Hold or the Intense Power, should you find it difficult to dispense when using the caulking gun, we recommend that you place the adhesive cartridge into a tub or bucket of hot water for 5 – 10 minutes, as this makes the adhesive easier to dispense and apply.

Useful Guides

Request technical drawing

Enter your details below to receive your selected technical drawing

 

Added to Specification Sheet!

This item has been added. You can continue browsing to add more items or review your Spec Sheet to generate your Schedule.

Continue Adding Go to Spec Sheet
 

Has been added to quote sheet

View Quote Request
 

This item has been added to your cart

This item has been added to your cart. Continue browsing to add more items or checkout to complete your order.

Continue Browsing Checkout