Back to products

Intrim® CR08

French Provincial

CR08

General

Intrim® CR08 timber chair rail is practical as well as decorative. Chair rails, also known as dado rails, were originally installed to protect walls from damage by chair backs, but are now used to give character and beautiful detail to a room. Adding chair rail to your room is a subtle choice that makes a big impact, and perfectly complements a wainscoting design.

Available in 66mm, 90mm, 115mm, 135mm, 185mm, 230mm, 285mm wide and 18mm thick and crafted in a range of timbers and finishes including FJ Pine, FJ Pine Primed, MR MDF, MR MDF Primed. This style of moulding is recommended for use in a French Provincial style interior. Samples are available for this profile.

Available in:

  • 66mm wide x 18mm thick x 5400mm length
  • 90mm wide x 18mm thick x 5400mm length
  • 115mm wide x 18mm thick x 5400mm length
  • 135mm wide x 18mm thick x 5400mm length
  • 185mm wide x 18mm thick x 5400mm length
  • 230mm wide x 18mm thick x 5400mm length
  • 285mm wide x 18mm thick x 5400mm length
  • FJ Pine
  • FJ Pine Primed
  • MR MDF
  • MR MDF Primed
Materials & finishes

Complete this form to access the price list as a quick guide for budgeting or you can request a Free quote.

Frequently Asked Questions

Is there a rebated chair rail option?

Yes, it can be done, we have standard profiles with rebates or we can customise a thickness to accommodate a rebate if required.

What height is my chair rail installed at?

The formula we recommend for calculating your dado rail height is: Wall height (finished floor level to ceiling) multiplied by 5 then times 2. E.g 2.4/5 x 2 = 0.96 You would then apply your chair rail within 100mm of this number.

Do I need a chair rail for Wainscoting?

No, you don't however for lower third Wainscoting we recommend a chair rail to finish off the appearance.

Can I use chair rail in wet areas?

Yes, we would supply in a treated pine.

Does my chair rail and architrave thickness need to be the same?

No, however if your chair rail is thicker than your architrave any overhang of the chair rail would need to be champered at a 45 degree angle to finish it.

Useful Guides

Request technical drawing

Enter your details below to receive your selected technical drawing

 

Added to Specification Sheet!

This item has been added. You can continue browsing to add more items or review your Spec Sheet to generate your Schedule.

Continue Adding Go to Spec Sheet
 

Has been added to quote sheet

View Quote Request
 

This item has been added to your cart

This item has been added to your cart. Continue browsing to add more items or checkout to complete your order.

Continue Browsing Checkout